高职《机械制造技术》课程体系改革探讨

本文回顾了高职《机械制造技术》课程体系的演变过程,分析了现有教材的优点和缺陷,提出本课程体系改革的基本指导思想,构建了理论与实践教学体系的具体框架.     

工艺空气压缩机组开车过程的思考

通过汽轮机组调速系统伺服马达不复位、主汽门不动作，反推出电磁阀控制线路接线错误，用人为短路压力开关等手段判断出组合油脱扣器活塞卡涩是造成现场延误开车的根本原因，提出完善大机组开车工作票制度、提高人员素质等措施。     

PWM整流器高功率因数的实现

论述了交流斩波电路中控制部分的工作原理，并对该电路中电抗器的取值进行了计算。采用16位80C196KC单片机能使控制电路非常简单，并容易实现高频开关器件整流器的高功率因数。     

锇(Ⅷ)-N-(8-喹啉基)-N’-苯甲酰基硫脲(QBTU)络合物吸附波的1.5次微分极谱研究

于0.025mol/LNaOH溶液中,Os(Ⅷ)-QBTU体系产生—明晰的极谱波,其1.5次微分峰电流与浓度在1.0×10~(-7)～4.0×10~(-5)mol/L范围内呈线性关系。研究了极谱电流的性质、反应机理及电极过程等后确认:络合物的组成为[OsO_4(OH)_2·QBTU]·Na_2并吸附于滴汞电极表面,配体QBTU在不离解出的情况下发生电还原,获得络合物吸附波,电极过程不可逆,[OsO_4(OH)_2·QBTU]~(2-)离子的条件稳定常数8.5×10~5。     

STM tunneling spectroscopy on high Tc superconductors

STM tunneling spectroscopy has been performed on the bulk single crystals of BiSrCaCuO (BSCCO) and the epitaxial thin films of YBaCuO (YBCO) at cryogenic temperatures. The STM images and tunneling spectra observed on the (001) surfaces can be classified into three cases; 1) Atomic image is visible. However, the tunneling spectrum shows semiconducting or smeared superconducting gap structures, depending on the tip-sample distance. 2) Clear atomic image can not be obtained. But, the tunneling spectrum shows flat bottom region with quite low zero bias conductance. 3) Tunneling spectra demonstrate gapless behavior, independent of the tip-sample separation. These observations support the quasi-2D electronic picture in whichs-wave like 2D superconducting layers are coupled with each other through the Josephson effect.     

Boundary Procedures for Summation-by-Parts Operators

Four different methods of imposing boundary conditions for the linear advection-diffusion equation and a linear hyperbolic system are considered. The methods are analyzed using the energy method and the Laplace transform technique. Numerical calculations are done, considering in particular the case when the initial data and boundary data are inconsistent.     

Oxidation of some aliphatic polyols on anodically deposited MnO2

Galvanostatic steady state current potential measurements were carried out for oxidation of a series of aliphatic alcohols having varying number of hydroxyl groups. The anodically deposited layer of MnO₂ on platinum was used as the electrode material. The deposit was characterised by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX) and electrode potential measurements. The catalytic role of MnO₂ in the electro-oxidation of alcohols was indicated by the chronopotentiograms and the cyclic voltammograms. An analysis of the electrochemical data indicated a catalytic EC mechanism in which Mn (V) is generated electrochemically and consumed chemically in succession. Based on this and the hydrogen bonding interaction between alcoholic hydroxyl groups and MnO₂ layer, a mechanism was proposed which accounts for the variation in the observed electrochemical reaction orders. Tafel behaviour was found to be followed only approximately. Current efficiency of the electrochemical oxidation of polyols was studied. Replacement of platinum by carbon as current collector was found to leave the electrocatalytic activity of the MnO₂ deposit practically unaltered.     

基于可拓学模型的大批量定制实施方法分析

简要阐述了当前企业环境的特点，分析了大批量定制及其可拓学模型；然后，从可拓学中的可拓工程出发，以“系列化”、“变型结构设计”和“变型工艺设计”为例，说明了可拓学在实施大批量定制中的应用，为企业寻找新的、有效的大批量定制实施方法提供料新的思路和工具。     

一种基于循环小波累积量的谐波恢复方法

循环统计量是乘性和加性噪声中谐波恢复问题的主要分析工具之一。本文在其基础上提出了一种新的理论与方法——基于循环小波累积量的谐波恢复方法。首先,提出了循环小波累积量的定义。然后,建立了基于一阶、二阶、三阶循环小波累积量的谐波分量的频率和相位的估计方法。在此基础上,采用了一种可调参数的小波,通过调节其参数来改善传统方法中频率分辨率低的缺陷。最后给出了模拟实验结果。